How to install drawer runners?

For drawer runners in the installation, you need to master the methods and steps, otherwise not installing slides, will affect the use of drawers. So, how to install the drawer slides? Let's take a look below.

Here is the content:

Understanding slide composition

Disassemble all inner rails

Installing the slide rails

Understanding slide composition

In the installation of drawer runners before, carefully understand its components, and also check whether the product accessories are complete, so that the installation will be faster. Usually, the slide consists of three parts: the inner track, the middle track, and the outer track, and each part is installed in a different position, and must be installed correctly. And also, the installation before the first to prepare some tools can be a more convenient installation.

Disassemble all inner rails

The next step is to start the installation of drawer runners before installation to the two sides of the inner track are first removed, while the middle and outer rails can be disassembled without. In the disassembly pay attention to the method, that cannot blindly disassemble, otherwise, it will damage the entire slide. To gently snap down the inner rail on the card spring to the internal direction by hand, then pull out the inner rail, disassembly to avoid deformation of the rail.

Installing the slide rails

First of all, install the main part of the slide, this part is more important, if it is not installed, it will affect the drawer runners' normal push and pull. Need to install the main part in the side of the cabinet position, installation is relatively simple, because the board furniture cabinets have ready-made installation holes, as long as the alignment of the above holes, can be installed. The main part is installed, and then start to install the inner rail, you need to use the screw drill to install it in the outer part of the drawer, you need to adjust the position, there are some spare holes on the outer side of the drawer, which is used to adjust the position of the inner rail. Finally, then connect the rails, and you can install the slide rail. Just align the drawer with a good cabinet embedded in the interior, and then use your fingers to press the inner rail on both sides of the card spring, and then slide into the cabinet inside.

The above is about how to install the drawer runners-related content, I believe that we all understand it! Drawer runners’ installation steps are more, and to master each detail part of the installation, if you do not know how to install, should try to find a professional master installation. At the same time, if you are interested in drawer slides, soft close drawer slides, ball-bearing slides, telescopic slides, telescopic rail, etc., you can contact us, our company has a very large number of products, our company's website is https://www.weihua-hardware.com, you are always welcome and look forward to working with you.